+- phyphox Forums (https://phyphox.org/forums)
+-- Forum: Discussion (https://phyphox.org/forums/forumdisplay.php?fid=1)
+--- Forum: Experiments and Ideas (https://phyphox.org/forums/forumdisplay.php?fid=4)
+--- Thread: Measurement of the resonance curve (Acoustics) (/showthread.php?tid=460)
RE: Measurement of the resonance curve (Acoustics) - Jens Noriʇzsɔɥ - 10-03-2021
Well, the current version is indeed 1.1.9, beta is at 1.1.10 though…
@icarochiabai2: could you please attach the device info gathered by phyphox. Submitting to our sensor database (at the very bottom of the menu) would be also great. Statistics are still rather low for “moto e(7) plus”…
Thanks.
RE: Measurement of the resonance curve (Acoustics) - icarochiabai2 - 10-03-2021
(10-03-2021, 05:15 PM)Jens Noritzsch Wrote: Well, the current version is indeed 1.1.9, beta is at 1.1.10 though…
@icarochiabai2: could you please attach the device info gathered by phyphox. Submitting to our sensor database (at the very bottom of the menu) would be also great. Statistics are still rather low for “moto e(7) plus”…
Thanks.
For sure. I submitted and here's one of the device info gathered in a successful run and device info available in the menu. Also, actually it's moto e(7), not moto e(7) plus, sorry for saying it wrong :/
RE: Measurement of the resonance curve (Acoustics) - Sebastian Staacks - 10-05-2021
Unfortunately, I could not find a crash report for the moto e(7) on the Google Play Console, but I have seen a suprising high number of crashes related to the audio output with sounds that are directly calculated in the experiment configuration (i.e. not using the newer tone generator). Are you using the configuration from the first post in this thread or one of the newer ones? I think, that this is the newest version by solid: https://phyphox.org/forums/showthread.php?tid=460&pid=2319#pid2319
If it is the old version from the first post, then I think that I have found the problem. The crash report is giving me a headache and I did not yet fully understand it, but the good news is that the new version (see link above) should not be affect, so you should be able to do your measurements with the new version.
If it is the new version, then please tap the "send feedback" button (or similar) when Android shows the dialog that the app has crashed. This way I should soon see details in the Google Play Console.
RE: Measurement of the resonance curve (Acoustics) - icarochiabai2 - 10-05-2021
(10-05-2021, 05:09 PM)Sebastian Staacks Wrote: Unfortunately, I could not find a crash report for the moto e(7) on the Google Play Console, but I have seen a suprising high number of crashes related to the audio output with sounds that are directly calculated in the experiment configuration (i.e. not using the newer tone generator). Are you using the configuration from the first post in this thread or one of the newer ones? I think, that this is the newest version by solid: https://phyphox.org/forums/showthread.php?tid=460&pid=2319#pid2319
If it is the old version from the first post, then I think that I have found the problem. The crash report is giving me a headache and I did not yet fully understand it, but the good news is that the new version (see link above) should not be affect, so you should be able to do your measurements with the new version.
If it is the new version, then please tap the "send feedback" button (or similar) when Android shows the dialog that the app has crashed. This way I should soon see details in the Google Play Console.
Yes, I was using the old version... The QR Code given to me wasn't the newest version, this new one works just fine. It's a shame because the due date it's now over and I couldn't make good measurements, but the experiment is so much fun to do. Thanks for the support!
RE: Measurement of the resonance curve (Acoustics) - Jens Noriʇzsɔɥ - 10-05-2021
Oh no.
We are deeply sorry about that — happy though that you are still enjoying it.Good news: Sebastian has apparently found the bug in our audio system causing all this. Thank you for your help in getting to the roots of it.
RE: Measurement of the resonance curve (Acoustics) - solid - 10-06-2021
Bravo Sebastian !!!
Dear users, do not use old versions of the program !
RE: Measurement of the resonance curve (Acoustics) - Jens Noriʇzsɔɥ - 10-06-2021
… please take those in https://phyphox.org/forums/showthread.php?tid=460&pid=2319#pid2319 instead.
RE: Measurement of the resonance curve (Acoustics) - esteban.bermudez - 11-05-2021
Hi,
This semester I´m teaching a physics lab course at the undergrad level and have been trying to involve the use of phyphox where I can for the lab-at-home experiments (we are still teaching virtual).
I wanted to say special thanks to ´Solid`for the two experiments he shared as they were exactly what I was looking for to design our lab practical on resonating air columns which students could do from their homes. Of course also thanks to the phyphox team as well not just for the app but also constantly updating and making the beta version available with improvements.
Initially I was combining the use of phyphox sound amplitude experiment with a separate web based frequency tone sweep generator, using two phones, but the experiments from Solid were much more convenient, specially the FFT with the accumulated runs, which by the way is also quite useful to use it muted in order to record and accumulate external sounds. In fact, one of my students is using it like that for his end of semester project to record accumulated FFTs of instrument notes (which are convenient to play a couple of times to get good signal to noise ratios).
Here I´m sharing some of the results from a couple of my students from an experiment that could be of interest for others here. Besides doing the simple FFT measurement of a open/closed tube, I had them explore how the frequency spectrum evolved as a function of the effective tube length, which can be achieved simply by adding fixed amounts of water volumes to the tube and taking/saving a new FFT each time (see attached images for effective length vs frequency). After all data has been taken then one can put it all together in 3D image plots. I thought it was a pretty nice way for students to see how each resonant mode evolved with reducing tube lengths.
Cheers,
Esteban
RE: Measurement of the resonance curve (Acoustics) - solid - 11-06-2021
Esteban, very good idea and very nice 3D plots!
With Brest wishes.
Mikhail
RE: Measurement of the resonance curve (Acoustics) - Jens Noriʇzsɔɥ - 08-25-2022
FYI, the upcoming/new version 1.1.11 breaks “resonance_white_FFT2500b.phyphox”: the average is not shown anymore.
At least, we succeeded in getting rid of differences between Android and iOS phyphox: now it is not working on both platforms… :-> I am aware that (at least) one other .phyphox file existed in the forum where the analysis block has not resulted in identical behaviour – just which?