+- phyphox Forums (https://phyphox.org/forums)
+-- Forum: Discussion (https://phyphox.org/forums/forumdisplay.php?fid=1)
+--- Forum: Experiments and Ideas (https://phyphox.org/forums/forumdisplay.php?fid=4)
+--- Thread: Kundt's tube (/showthread.php?tid=1100)
Kundt's tube - Prof2fisic - 10-12-2020
We want to use Phyphox to measure the speed of sound in a Kundt's tube. By calculating the FTT of the sound produced by tapping on the tube, we qualitatively find the eigenmodes.
To improve experiment, we would like to either average the spectra obtained by several manipulations, or increase the duration of the sample by acquiring several buffers. It's possible ?
Thank You.
RE: Kundt's tube - Jens Noriʇzsɔɥ - 10-13-2020
Does “acquiring several buffers” mean something like the “Historique” tab, however, just as raw data?
Have you already tried to record the response to white noise (check the bottom of the “Paramètre” tab)?
RE: Kundt's tube - Prof2fisic - 12-17-2020
(10-13-2020, 02:58 PM)Jens Noritzsch Wrote: Does “acquiring several buffers” mean something like the “Historique” tab, however, just as raw data?
Exactly.
(10-13-2020, 02:58 PM)Jens Noritzsch Wrote: Have you already tried to record the response to white noise (check the bottom of the “Paramètre” tab)?
We want to record impulse response, but it seems to be a good idea.
I'll try this...
Thnk's
Cédric
RE: Kundt's tube - solid - 12-17-2020
Cédric
you can obtain a very nice spectrum using the acoustic resonance application. Some examples can be found in this forum.
Look https://phyphox.org/forums/showthread.php?tid=776 and https://phyphox.org/forums/showthread.php?tid=460
Mikhail