![]() |
Sonar - Printable Version +- phyphox Forums (https://phyphox.org/forums) +-- Forum: Discussion (https://phyphox.org/forums/forumdisplay.php?fid=1) +--- Forum: General (https://phyphox.org/forums/forumdisplay.php?fid=3) +--- Thread: Sonar (/showthread.php?tid=1143) |
Sonar - Samuel - 11-02-2020 Hello, I used the "remote access" command but I notice that the remote access and the main device are not having the same scaling for the graphs. This is shown in the attachments. I would like to plead if someone could show me how to correct the difference in the scaling of the graphs of the two devices so they have the same scaling. RE: Sonar - Jens Noriʇzsɔɥ - 11-02-2020 The scaling is identical on my devices and I have not ever seen a difference yet. Which phyphox version is it and what kind of browser are you using for remote access? RE: Sonar - Jens Noriʇzsɔɥ - 11-02-2020 Ok, the axes are automatically adapted to the data. For Sonar, it could occur that with some specific “bad” data the horizontal axis could get rather short. Perhaps the “chirp” has not been loud enough leading to such a response… |