+- phyphox Forums (https://phyphox.org/forums)
+-- Forum: App-Feedback (https://phyphox.org/forums/forumdisplay.php?fid=6)
+--- Forum: Bugs and Problems (https://phyphox.org/forums/forumdisplay.php?fid=9)
+--- Thread: Error connecting to Ti CC2541DK-Sensors (/showthread.php?tid=1495)
Error connecting to Ti CC2541DK-Sensors - Hedaja - 01-04-2022
Hi
I found an old Sensor Devlopment kit from TI
https://www.ti.com/tool/CC2541DK-SENSOR
When I add it via Bluetooth it detects all the sensors and adds them as experiments.
But if I then try and start one of those experiments and I connect to the sensor kit, it shows me the error message as seen in the attachment.
Unfortunately I can't really make anything of it.
If one of you had an idea, what's wrong, I'd highly appreciate it.
Thanks in advance
Christian
RE: Error connecting to Ti CC2541DK-Sensors - Jens Noriʇzsɔɥ - 01-10-2022
We have just woken up from hibernation so your post was unfortunately stuck in the moderation queue for quite some time.
Please check https://phyphox.org/wiki/index.php/Texas_Instruments_SensorTag_CC2541 for details. We would be looking forward to getting these thoroughly tested…
