This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Speed difference when using Experiment or arduino BLE libary
When creating a BLE device which has to sense a PPG signal and sent this data over BLE to my smartphone, I noticed that there is a large difference in transmission speed between using the Experiments option in the libary for the Arduino IDE and a direct setup of the BLE server. Via the experiments option, a fs of 25 Hz was easely reached, while the direct setup just get to a fs of 7 Hz. Is there an explanation for this difference. For my project, I cannot use the experiments option, because the export is not defined in it.
Could you please share the two .phyphox files, sharing is directly possible from the menu.

“Export” is rather high on the TODO list, AFAICT.

could you also tell us what microcontroller you are using?


Forum Jump: