This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Differences in distance-out-of-GPS-data between Phyphox versions?
The "distance from start" is just the distance from the current position in a direct line to the start of the measurement. It is not exported and it should not affect your data.

The other change (which was not documented separately as it was supposed to be only a "cleanup" of the code) in the experiment configuration was that the individual steps of the calculation were replaced by the new formula-node, which is easier to read. However, it looks like I made a little mistake by mixing up a variable with the result that change in longitude is counted as if you were running on the equator instead of somewhere in Germany, which would fit the difference you are seeing.

Can you provide the exported raw data? This would make it easier to verify that this indeed is the error.

Messages In This Thread
RE: Differences in distance-out-of-GPS-data between Phyphox versions? - by Sebastian Staacks - 07-16-2019, 11:00 PM

Forum Jump: