09-10-2021, 08:49 AM
(09-09-2021, 06:51 PM)Jens Noritzsch Wrote: Hi hpm,
the output tags for bluetooth input do not support arrays, so you need to individually define each of the 10 values. The offset attributes have to be altered accordingly. (0, 2, 4, … for two byte values).
HTH
Hi Jens,
Thank you so much for the reply,
I have tried to individually define each of the 10 values where each value is representing an acceleration reading that I gathered. I am now able to generate these acceleration values successfully, but when I tried to add a time value to each of the 10 readings I encountered some more problems.
I generated the first time value by setting the 'extra' field in one of the output buffers to 'time'. For generating time values for the rest of the 9 acceleration readings I tried adding a small time increment each time (0.001 second) using the 'ramp' module. Then when I tried to plot the acceleration readings against time values I get really weird results as shown in the picture. The time values generated seemed to be repeating themselves and my guess was that there's something wrong with clearing the buffers. So I tried various combinations of clearing the buffers but none of them seemed to be working.
Would you mind pointing me in the right directions again on how to add time values in the editor please? Thank you again for helping me!!
I have also attached my phyphox experiment file here if it helps.
nrf52_with_10byte_buffer.phyphox (Size: 9.88 KB / Downloads: 415)