Two Arduino sending Data

[PBra]

Hello every one, 

I'd need some help with the writing of an XML file for an experiment in which two arduino send accelerometer data to the phyphox app. 
I am completely new to XML languange so any hel will be appreciated. 

I am using the experiment editor of phyphox. I'll try to explain what I've done and what I am missing. 

-In the Main window of the editor I've just added the title of the experiment

-In the input window I've added two bluetooth modules.

• Identification: set to right and left, respectively. I'll move the sensors with my right and left hands
  
• Device names: right_ARD and left_ARD. I will set the same device names when uploading the codes on the two sensors. 
  
• Service UUID: I've left this blank. To connect the sensors to the app is it sufficient the Device Name or do I need this information as well? 
  
• Mode: Poll. I need the sensors to send data continuously at a sampling rate of 100 Hz (which I put in the following box). is the correct? 
  
• I've checked the Subscribe on start boce as i want to start the experiment manually from the app
  
• Config: I cannot understand if I have to change something in this case
  
• Output: From what I understood I should add three outputs, one for each axis of the accelerometer. After this I don't know what should I do. Which of these boxes are mandatory to be filled? I can imagine that as Conversion function I should use some from the Float option as it is the format of the variables that I will use to read the accelerometer data on the arduino (as in the random number experiment for BLE). In the characteristic boxes shoul I put the name of the variables that I will use on the arduino code to store the data?
  

-I didn't consider the Output window as i don't need the app to send data to the sensors

-Views

• I've added two views with three graphs each, one for each component of the accelerometer data. 
  
• I've just change some labels of the graphs and the x y axes
  

-Analysis

• I've just created empty buffers and connected them to the graphs. 
  

This is what I managed to do. 
I'll post the code here 

Code:

<phyphox xmlns="http://phyphox.org/xml" xmlns:editor="http://phyphox.org/editor/xml" version="1.7" editor:version="1.0" locale="en">
    <title>Arduino_acc</title>
    <category>no category</category>
    <description></description>
    <icon format="string">ARD</icon>
    <data-containers>
        <container size="1000" static="false">Output 1</container>
        <container size="1000" static="false">Output 2</container>
        <container size="1000" static="false">Output 3</container>
        <container size="1000" static="false">Output 1 (1)</container>
        <container size="1000" static="false">Output 2 (1)</container>
        <container size="1000" static="false">Output 3 (1)</container>
    </data-containers>
    <input>
        <bluetooth editor:uuid="98" editor:posx="479.6499938964844" editor:posy="8.112518310546875" id="Right" name="Right_ARD"  mode="poll" rate="100" subscribeOnStart="true">
            <config conversion="string"></config>
            <output char="Racc_x" conversion="string">Output 1 (1)</output>
            <output char="Racc_y" conversion="string">Output 2 (1)</output>
            <output char="Racc_z" conversion="string">Output 3 (1)</output>
        </bluetooth>
        <bluetooth editor:uuid="99" editor:posx="18.212499618530273" editor:posy="0" id="Left" name="Left_ARD"  mode="poll" rate="100" subscribeOnStart="true">
            <config conversion="string"></config>
            <output char="Lacc_x" conversion="string">Output 1 (1)</output>
            <output char="Lacc_y" conversion="string">Output 2 (1)</output>
            <output char="Lacc_z" conversion="string">Output 3 (1)</output>
        </bluetooth>
    </input>
    <output>
    </output>
    <analysis sleep="0"  onUserInput="false">
    </analysis>
    <views>
        <view label="right ">
            <graph editor:uuid="130" editor:posx="510.3000183105469" editor:posy="180.4749984741211" label="ACC_R" aspectRatio="2.5" style="lines" lineWidth="1" color="ff7e22" partialUpdate="false" history="1" labelX="time" labelY="X" labelZ="" unitX="" unitY="" unitZ="" logX="false" logY="false" logZ="false" xPrecision="3" yPrecision="3" zPrecision="3" scaleMinX="auto" scaleMaxX="auto" scaleMinY="auto" scaleMaxY="auto" scaleMinZ="auto" scaleMaxZ="auto" minX="0" maxX="0" minY="0" maxY="0" minZ="0" maxZ="0"  mapWidth="0"       >
                <input axis="x">Output 1 (1)</input>
            </graph>
            <graph editor:uuid="217" editor:posx="509.72503662109375" editor:posy="333.83750915527344" label="ACC_R" aspectRatio="2.5" style="lines" lineWidth="1" color="ff7e22" partialUpdate="false" history="1" labelX="time" labelY="Y" labelZ="" unitX="" unitY="" unitZ="" logX="false" logY="false" logZ="false" xPrecision="3" yPrecision="3" zPrecision="3" scaleMinX="auto" scaleMaxX="auto" scaleMinY="auto" scaleMaxY="auto" scaleMinZ="auto" scaleMaxZ="auto" minX="0" maxX="0" minY="0" maxY="0" minZ="0" maxZ="0"  mapWidth="0"       >
                <input axis="x">Output 2 (1)</input>
            </graph>
            <graph editor:uuid="230" editor:posx="510.48748779296875" editor:posy="492.5749969482422" label="ACC_R" aspectRatio="2.5" style="lines" lineWidth="1" color="ff7e22" partialUpdate="false" history="1" labelX="time" labelY="Z" labelZ="" unitX="" unitY="" unitZ="" logX="false" logY="false" logZ="false" xPrecision="3" yPrecision="3" zPrecision="3" scaleMinX="auto" scaleMaxX="auto" scaleMinY="auto" scaleMaxY="auto" scaleMinZ="auto" scaleMaxZ="auto" minX="0" maxX="0" minY="0" maxY="0" minZ="0" maxZ="0"  mapWidth="0"       >
                <input axis="x">Output 3 (1)</input>
            </graph>
        </view>
        <view label="left">
            <graph editor:uuid="143" editor:posx="18.162500381469727" editor:posy="189.51250457763672" label="ACC_L" aspectRatio="2.5" style="lines" lineWidth="1" color="ff7e22" partialUpdate="false" history="1" labelX="time" labelY="X" labelZ="" unitX="" unitY="" unitZ="" logX="false" logY="false" logZ="false" xPrecision="3" yPrecision="3" zPrecision="3" scaleMinX="auto" scaleMaxX="auto" scaleMinY="auto" scaleMaxY="auto" scaleMinZ="auto" scaleMaxZ="auto" minX="0" maxX="0" minY="0" maxY="0" minZ="0" maxZ="0"  mapWidth="0"       >
                <input axis="x">Output 1 (1)</input>
            </graph>
            <graph editor:uuid="243" editor:posx="16.800000190734863" editor:posy="343.0749969482422" label="ACC_L" aspectRatio="2.5" style="lines" lineWidth="1" color="ff7e22" partialUpdate="false" history="1" labelX="time" labelY="Y" labelZ="" unitX="" unitY="" unitZ="" logX="false" logY="false" logZ="false" xPrecision="3" yPrecision="3" zPrecision="3" scaleMinX="auto" scaleMaxX="auto" scaleMinY="auto" scaleMaxY="auto" scaleMinZ="auto" scaleMaxZ="auto" minX="0" maxX="0" minY="0" maxY="0" minZ="0" maxZ="0"  mapWidth="0"       >
                <input axis="x">Output 2 (1)</input>
            </graph>
            <graph editor:uuid="256" editor:posx="14.20001220703125" editor:posy="508.45001220703125" label="ACC_L" aspectRatio="2.5" style="lines" lineWidth="1" color="ff7e22" partialUpdate="false" history="1" labelX="time" labelY="Z" labelZ="" unitX="" unitY="" unitZ="" logX="false" logY="false" logZ="false" xPrecision="3" yPrecision="3" zPrecision="3" scaleMinX="auto" scaleMaxX="auto" scaleMinY="auto" scaleMaxY="auto" scaleMinZ="auto" scaleMaxZ="auto" minX="0" maxX="0" minY="0" maxY="0" minZ="0" maxZ="0"  mapWidth="0"       >
                <input axis="x">Output 3 (1)</input>
            </graph>
        </view>
    </views>
    <export>
    </export>
</phyphox>

I'll attach the phyphox file here.

If anyone could help me I would be grateful. 

Tanks in advance!!