09-25-2023, 08:38 PM
Dear @solid,
thank you for the wonderful experiment. I tried as acoustic resonator and it worked perfectly. Both, the sweep option and the FFT.
Then i thought, this could be wonderful for High-/Lowpassfilter with RC. I built one with C=100nF and R=1000Ω.
I can measure the damping (see attached) figure with an oscilloscope, but didn't suceeded with an audio option.
My idea was to use a 3.5 mm 4-conductor and use and audio chanel R and the microphone pin AUX.
But no success. Sometimes it was misinterpreted by the phone as signal to reduce the volume.
Have anyone an idea?
thank you for the wonderful experiment. I tried as acoustic resonator and it worked perfectly. Both, the sweep option and the FFT.
Then i thought, this could be wonderful for High-/Lowpassfilter with RC. I built one with C=100nF and R=1000Ω.
I can measure the damping (see attached) figure with an oscilloscope, but didn't suceeded with an audio option.
My idea was to use a 3.5 mm 4-conductor and use and audio chanel R and the microphone pin AUX.
But no success. Sometimes it was misinterpreted by the phone as signal to reduce the volume.
Have anyone an idea?