Hallo,
inzwischen ist das angekündigte Update veröffentlicht! Ich hab mal ein Beispielexperiment erstellt, in dem 6 Werte übertragen und in jeweils einem Graph bzw. einem Value Feld angezeigt werden. Dabei habe ich dann allerdings festgestellt, dass wir das Thema Speicheroptimierung dringend angehen müssen. Als ersten Workaround habe ich die Speicherintensive Experimenterstellung in einen extra "Task" übergeben.
Wir haben auch schon erste Lösungsideen mit der wir das Speicherproblem entschärfen können, benötigen allerdings noch ein wenig Zeit dafür. Ich hoffe der Workaround ist halbwegs verständlich, falls es irgendwo hängt gerne nachfragen!
Falls Arduino Nano User mitlesen: Das Beispiel funktioniert nur mit einem ESP32, die Firmware des Arduino Nano BLE ermöglicht leider nur eine Paketgröße von 20 Byte (obwohl die Hardware mehr könnte).
Viele Grüße
Dominik
Code:
#include <phyphoxBle.h>
void setup()
{
PhyphoxBLE::start("My Device");
PhyphoxBLE::setMTU(48); //6 float values 6*4 = 24 bytes
// An extra task takes care of the experiment creation
xTaskCreate(
generateExperiment, // Function that should be called
"experimentTask", // Name of the task (for debugging)
16000, // Stack size (bytes)
NULL, // Parameter to pass
1, // Task priority
NULL // Task handle
);
}
void loop()
{
float value1 = 1+ 0.1*random(0, 10);
float value2 = 2+ 0.1*random(0, 10);
float value3 = 3+ 0.1*random(0, 10);
float value4 = 4+ 0.1*random(0, 10);
float value5 = 5+ 0.1*random(0, 10);
float value6 = 6+ 0.1*random(0, 10);
// store 6 float values in an array
float values[6] = {value1,value2,value3,value4,value5,value6};
//send the 6 float values
PhyphoxBLE::write(&values[0],6);
delay(100);
}
void generateExperiment(void * parameter){
//Experiment
PhyphoxBleExperiment receiveSixFloats; //generate experiment on Arduino which plot random values
receiveSixFloats.numberOfChannels = 6;
receiveSixFloats.setTitle("Random Number Plotter");
receiveSixFloats.setCategory("Arduino Experiments");
receiveSixFloats.setDescription("Random numbers are generated on Arduino and visualized with phyphox afterwards");
//View
PhyphoxBleExperiment::View firstView;
firstView.setLabel("FirstView"); //Create a "view"
PhyphoxBleExperiment::View secondView;
secondView.setLabel("SecondView"); //Create a "view"
//Value 1
PhyphoxBleExperiment::Graph Graph1; //Create graph which will plot random numbers over time
Graph1.setLabel("Value 1");
Graph1.setUnitX("s");
Graph1.setUnitY("");
Graph1.setLabelX("time");
Graph1.setLabelY("random number");
Graph1.setChannel(0, 1);
PhyphoxBleExperiment::Value Value1;
Value1.setLabel("Number 1");
Value1.setUnit("");
Value1.setChannel(1);
//Value 2
PhyphoxBleExperiment::Graph Graph2; //Create graph which will plot random numbers over time
Graph2.setLabel("Value 2");
Graph2.setUnitX("s");
Graph2.setUnitY("");
Graph2.setLabelX("time");
Graph2.setLabelY("random number");
Graph2.setChannel(0, 2);
PhyphoxBleExperiment::Value Value2;
Value2.setLabel("Number 2");
Value2.setUnit("");
Value2.setChannel(2);
//Value 3
PhyphoxBleExperiment::Graph Graph3; //Create graph which will plot random numbers over time
Graph3.setLabel("Value 3");
Graph3.setUnitX("s");
Graph3.setUnitY("");
Graph3.setLabelX("time");
Graph3.setLabelY("random number");
Graph3.setChannel(0, 3);
PhyphoxBleExperiment::Value Value3; //Creates a value-box.
Value3.setLabel("Number 3"); //Sets the label
Value3.setUnit(""); //The physical unit associated with the displayed value.
Value3.setChannel(3);
//Value 4
PhyphoxBleExperiment::Graph Graph4; //Create graph which will plot random numbers over time
Graph4.setLabel("Value 4");
Graph4.setUnitX("s");
Graph4.setUnitY("");
Graph4.setLabelX("time");
Graph4.setLabelY("random number");
Graph4.setChannel(0, 4);
PhyphoxBleExperiment::Value Value4; //Creates a value-box.
Value4.setLabel("Number 4"); //Sets the label
Value4.setUnit(""); //The physical unit associated with the displayed value.
Value4.setChannel(4);
//Value 5
PhyphoxBleExperiment::Graph Graph5; //Create graph which will plot random numbers over time
Graph5.setLabel("Value 5");
Graph5.setUnitX("s");
Graph5.setUnitY("");
Graph5.setLabelX("time");
Graph5.setLabelY("random number");
Graph5.setChannel(0, 5);
PhyphoxBleExperiment::Value Value5; //Creates a value-box.
Value5.setLabel("Number 5"); //Sets the label
Value5.setUnit(""); //The physical unit associated with the displayed value.
Value5.setChannel(5);
//Value 6
PhyphoxBleExperiment::Graph Graph6; //Create graph which will plot random numbers over time
Graph6.setLabel("Value 6");
Graph6.setUnitX("s");
Graph6.setUnitY("");
Graph6.setLabelX("time");
Graph6.setLabelY("random number");
Graph6.setChannel(0, 6);
PhyphoxBleExperiment::Value Value6; //Creates a value-box.
Value6.setLabel("Number 6"); //Sets the label
Value6.setUnit(""); //The physical unit associated with the displayed value.
Value6.setChannel(6);
firstView.addElement(Graph1); //attach graph to view
firstView.addElement(Value1); //attach value to view
firstView.addElement(Graph2); //attach graph to view
firstView.addElement(Value2); //attach value to view
firstView.addElement(Graph3); //attach graph to view
firstView.addElement(Value3); //attach value to view
firstView.addElement(Graph4); //attach graph to view
firstView.addElement(Value4); //attach value to view
firstView.addElement(Graph5); //attach graph to view
firstView.addElement(Value5); //attach value to view
firstView.addElement(Graph6); //attach graph to view
firstView.addElement(Value6); //attach value to view
receiveSixFloats.addView(firstView); //attach view to experiment
PhyphoxBLE::addExperiment(receiveSixFloats); //attach experiment to server
vTaskDelete(NULL);
}
